Are VEVOR Chainsaws Any Good? 62cc Review and Verdict

Review Information

• Reviewed by: Jack Beurge
• Review type: Research-based review
• Testing status: Not personally tested by SAWOFF — based on manufacturer documentation, reputable sources, and documented owner-reported patterns
• Published: October 19, 2026
• Sources: VEVOR 62cc and 58cc gas chainsaw product listings and owner's manuals · Home Depot customer review data for the VEVOR 62cc 20-inch gas chainsaw · Great Wall Chainsaws VEVOR CN-58G review and parts commentary · VEVOR storefront review aggregates (US and EU)

Information in this review is labeled as one of four types: 🧪 SAWOFF hands-on test, 🏭 manufacturer specification, 📚 research from reputable sources (including documented owner-reported patterns), or 🧠 editorial assessment. See our testing methodology and editorial policy.

Affiliate Disclaimer: SAWOFF earns commissions from qualifying VEVOR purchases at no extra cost to you.

QUICK ANSWER

Yes, with conditions. A VEVOR 62cc gas chainsaw gives you a 20-inch bar, real two-stroke displacement, and enough power for firewood and storm cleanup for roughly $100-$160 - a fraction of a name-brand saw. The catch is quality control and parts support. Owner ratings split sharply: the saws that run well earn four and five stars, while the ones that will not start out of the box drag the average down. If you want a new saw, a warranty, and light-duty use, it is a defensible buy. If you need a saw to earn a living, it is the wrong tool.

What VEVOR Actually Sells

VEVOR is a broad online brand, not a chainsaw factory. Its gas saws are built by Chinese OEM manufacturers and sold under the VEVOR label, which explains both the pricing and the batch-to-batch variation in specs and parts.

The gas lineup, from smallest to largest:

Model class	Displacement	Bar	Typical street price	Best fit
Compact	25.4 cc	12 in	$70-$100	Limbs and light pruning
Mid	52 cc	18 in	$90-$130	Yard cleanup, small firewood
CN-58G	58 cc	20 in	$100-$150	Firewood, storm cleanup
62 cc	62 cc	20 in	$100-$160	Heavier firewood and felling

Prices move constantly with coupons and bundles, so treat those as a range rather than a quote. The important point is that the 58cc and 62cc saws are not toys: they are full-size, conventional two-stroke saws with real fuel and oil tanks, not battery-powered trim saws.

VEVOR 62cc Specs

Specification	Listed figure
Displacement	62 cc
Rated power	3.8 hp (2.8 kW)
Max engine speed	12,000 rpm
Bar length	20 in
Chain	3/8 in pitch (verify gauge and drive links on the bar stamp)
Fuel tank	about 550 ml
Oil tank	about 260 ml
Fuel mix	40:1
Weight	about 16 lb (7.3 kg) powerhead
Warranty	limited 12 months

Two spec-sheet cautions. First, the power figure is a marketing number, not a dyno result; a 62cc budget saw does not cut like a 62cc pro saw because porting, carburetion, and combustion quality differ. Second, chain specs vary by batch. Read the stamp on your bar before ordering a replacement chain, and see our drive link measuring guide if the stamp is worn.

What Owners Actually Report

The review data tells a consistent story once you separate the two camps.

At Home Depot, the 62cc 20-inch saw sits around 3.2 out of 5 across roughly 77 reviews, with only about a quarter of buyers saying they would recommend it. On VEVOR’s own storefronts the averages run higher, around 4.2 to 4.3 across nearly 200 reviews. That gap is not a conspiracy - it reflects different buyers. Retail shoppers who receive a saw that will not start leave one-star reviews; direct buyers who get a good unit and tune it themselves review the value.

The recurring themes in negative reviews:

• Hard starting out of the box. Carburetor settings are often off, and the starting procedure is less forgiving than a name-brand saw.
• Assembly and fasteners. Loose bolts, poorly seated handles, and occasional missing parts.
• Chain and bar quality. Serviceable but not pro-grade; expect to replace the chain sooner than you would on a Stihl.
• Support friction. Warranty claims move slowly, and there is no dealer to walk the saw into.

The recurring themes in positive reviews:

• It cuts. For the money, a running 62cc saw with a 20-inch bar handles firewood and storm debris.
• Simple to service. Conventional two-stroke layout, standard plugs, and easy access to the carburetor and filters.
• Value math. At $120, the saw can pay for itself in one storm season against rental or dealer prices.

Build Quality and Parts: The Real Trade-off

The engine is the least interesting part of a budget saw. The real difference between VEVOR and a name brand shows up in the ecosystem around it.

On a STIHL or Husqvarna, a dealer stocks the coil, carburetor, recoil, clutch, oiler, and every wear part, and a repair usually takes days. On a VEVOR, the saw’s consumables are standard - bars, chains, plugs, filters, and fuel lines are easy to buy - but model-specific parts come through VEVOR support or marketplace sellers. That can mean waiting weeks for a $15 part, and on a $120 saw, a $90 repair bill changes the math quickly.

This is the trade-off reviewers keep circling: the saw is cheap enough to be nearly disposable, but it is not designed to be rebuilt forever. If you accept that, the value proposition works. If you expect dealer-level support, it does not.

Who Should Buy It

• Homeowners with occasional firewood or storm cleanup. A running 62cc VEVOR will buck rounds and clear limbs, and the price leaves room for a spare chain and a good bar oil habit.
• Budget-first buyers who can turn a screwdriver. Carb tuning, chain tension, and basic maintenance are learnable, and this saw rewards owners who learn them.
• Second-saw buyers. As a backup or a saw to lend out, the low price makes sense.

Who Should Not

• Professionals and daily users. Vibration, weight, and parts downtime will cost you more than the purchase price saves.
• First-time saw owners who want zero fuss. A used name-brand saw from a dealer, or a new homeowner-class saw with local support, is the safer path.
• Anyone who needs a specific chain or bar fast. Batch variation and parts delays make this a poor choice for a saw that must run tomorrow.

VEVOR vs a Used Name-Brand Saw

At $120-$160, the VEVOR competes directly with used STIHL and Husqvarna saws. That comparison is closer than it looks:

Factor	New VEVOR 62cc	Used name-brand (e.g., STIHL 038)
Price	$100-$160	$150-$300
Condition	New, unproven	Varies; inspect compression and spark
Power	62cc, budget porting	61-72cc, proven design
Parts	Generic consumables, slow model-specific support	Broad dealer and aftermarket support
Warranty	Limited 12 months	None
Best for	Light use with a return window	Buyers who can inspect and maintain

If you can inspect a used saw and check compression, a used name-brand machine is often the better long-term tool - our STIHL 038 specs guide shows what to look for on one classic example. If you want new, a warranty, and no inspection risk, the VEVOR is the pragmatic choice.

Before You Start It: Setup Checklist

The first tank decides whether you got a good unit. Do this inside the return window:

1. Mix fuel correctly. 40:1 with a quality air-cooled two-stroke oil. Do not guess, and do not run straight gas even for a minute.
2. Fill the bar oil tank with proper bar and chain oil, not motor oil. Our bar oil guide explains why.
3. Check chain tension. The chain should snap back against the bar with light drag, not hang loose or bind at the nose.
4. Inspect fasteners. Tighten the bar nuts and check the handle and cover bolts before the first start.
5. Follow the cold-start procedure exactly. Choke on, prime, pull until it pops, choke off, pull to run. Budget saws are less tolerant of a flooded engine.
6. Let it idle and tune. If it will not idle or bogs when warm, adjust the idle speed and low screw in small increments before assuming the saw is defective.
7. Cut a test log. Confirm it oils, pulls chips, and does not overheat. If it fails any of these, return it rather than accepting a repair.

Verdict

Rating: 3.4 / 5 for occasional-use value.

The VEVOR 62cc is a real chainsaw at a price that makes name-brand saws look expensive. It cuts, it services simply, and when you get a good unit it is a lot of tool for the money. It is also a quality-control lottery with a thin parts network, and it will not match a pro saw in vibration, longevity, or resale.

Buy it if you need a new saw for light work and understand the trade-off. Skip it if the saw has to be reliable on someone else’s schedule. For a broader look at better-supported options at every price, see our best chainsaws of 2026 and the chainsaw buying guide.

FAQ

Are VEVOR chainsaws any good?

For occasional homeowner use, yes. A VEVOR 62cc saw delivers a 20-inch bar and real displacement for roughly $100-$160. Quality control varies, so some units need carb tuning or arrive with starting issues. Treat it as a value saw, not a professional tool.

Who makes VEVOR chainsaws?

VEVOR is a brand rather than a factory. The saws are produced by Chinese OEM manufacturers and sold under the VEVOR name, which is why specs and parts can vary between batches. VEVOR provides the branding, warranty, and retail support.

What fuel mix does a VEVOR 62cc chainsaw use?

The 62cc model is listed at 40:1 - 40 parts gasoline to 1 part two-stroke oil. Use a quality oil rated for air-cooled engines and mix fresh fuel. Do not run straight gasoline, and do not assume 50:1.

What bar and chain does the VEVOR 62cc use?

It ships with a 20-inch bar, typically on 3/8-inch pitch chain. Gauge and drive link count vary by batch, so read the stamp on the bar that ships with your saw before ordering a replacement chain.

Is the VEVOR 62cc a professional saw?

No. It is a homeowner and occasional-use saw. The engine is a conventional two-stroke, the plastics and fasteners are budget-grade, and there is no dealer service network. Daily production work is the wrong use case.

Can you get replacement parts for a VEVOR chainsaw?

Consumables such as bars, chains, spark plugs, and filters are standard and easy to source. Model-specific parts like coils, carburetors, and recoil assemblies come through VEVOR support or marketplace sellers and can take weeks to arrive.

Does the VEVOR 62cc have a warranty?

VEVOR advertises a limited 12-month warranty on its gas chainsaws. Service runs through VEVOR support rather than a local dealer, so keep the receipt and packaging and test the saw thoroughly inside the retailer’s return window.

Keep Reading

• Best Chainsaws of 2026 - the picks we would buy at every price.
• Chainsaw Buying Guide - size, power, and features explained.
• STIHL 038 Specs - what a used classic looks like on paper.
• Chainsaw Fuel Mix Ratio - get 40:1 and 50:1 right.
• Chainsaw Bar Oil Guide - lubrication and oiler fixes.

Frequently Asked Questions

Are VEVOR chainsaws any good?

For occasional homeowner use at the price, yes. A VEVOR 62cc saw delivers real displacement and a 20-inch bar for roughly $100-$160, but quality control is a lottery: some arrive running well, others need carburetor tuning or arrive with starting problems. Treat it as a value saw, not a Stihl replacement.

Who makes VEVOR chainsaws?

VEVOR is a brand, not a factory. The saws are built by Chinese OEM manufacturers and sold under the VEVOR name, which is why specs and parts can vary between batches. VEVOR handles the branding, warranty, and retail support.

What fuel mix does a VEVOR 62cc chainsaw use?

The 62cc saw is listed at 40:1, meaning 40 parts gasoline to 1 part two-stroke oil. Use a quality oil rated for air-cooled engines and mix fresh fuel. Never run straight gasoline, and do not assume 50:1.

What bar and chain does the VEVOR 62cc use?

It ships with a 20-inch bar, typically on 3/8-inch pitch chain. Gauge and drive link count can vary between batches, so read the stamp on the bar that comes with your saw before ordering a replacement chain.

Is the VEVOR 62cc a professional saw?

No. It is a homeowner and occasional-use saw. The engine is a conventional two-stroke, the plastics and fasteners are budget-grade, and there is no dealer service network. Running one daily in production work is the wrong use case.

Can you get replacement parts for a VEVOR chainsaw?

Consumables like bars, chains, spark plugs, and filters are standard and easy to source. Model-specific parts such as ignition coils, carburetors, and recoil assemblies come through VEVOR support or marketplace sellers and can be slow to arrive. That parts gap is the real trade-off at this price.

Does the VEVOR 62cc have a warranty?

VEVOR advertises a limited 12-month warranty on its gas chainsaws. In practice, service is handled through VEVOR support rather than a local dealer, so keep the receipt, the box, and photos of any defect, and test the saw thoroughly inside the retailer's return window.